Re: Schroth Rallye 4

[JSEVW@aol.com]

Hey Chris...

   I have two Rallye 4' in my car and they were fairly easy to put in.  First
definately take the seats out of the car( easy look at bentley).  the mounting
pieces do need to be bent to have the right angles, mostly trial and error.
The stock lower rear seat belt bolts, and the outer fronts have to be taken
out and then reinstalled with the Schroth bracket under them.  They are pretty
easy to access by removing some of the plastic trim.  The front innner part
mount to the seat itself by removing the bolt just like the others.
WARNING...  Don't overtorque the seat belt bolts...they strip pretty easily( I
did it on my old Jetta), try to use a torque wrench.  Overall it is a pretty
simple, but time consuming install.  Hope this isn't to jumbled for you to
understand, but I did this install some time ago.

  good luck and e-mail with any other ?'s


  jeff
  95 vento vr6  modded.... 

p.s. I am in MA so if you are close I would give you hand with the install
sometime