[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: DTC errors



At 08:16 PM 3/20/99 -0500, you wrote:
>Out of nowhere my check engine light came on this afternoon. I stopped by
>the dealer on my way home to check things out. He comes back to say I had
>over-revved the car, and that's why. I proceeded to tell him I did no such
>thing. Side note: I have a Garret chip and this would mean I passed 6900,
>whatever. He printed out the VAG slip and this is what it said: (verbatim)
>
>--------------------------------------------------------------------------
>037906259N MOTRONIC M5.9            HS V01
>    Coding    00000                                    WSC 00066
>
>
>    2 DTC recognized
>
>00543    035
>RPM upper Limit exceeded
>sporadic DTC
>
>17884    P1476     035
>EVAP Emission Contr.LDP Circ.
>Malfunction/Insufficient Vacuum
>
>
>
>---------------------------------------------------------------------------
>
>6N0909603   D   AIRBAG  VW2                            V00
>    Coding      00068                                        WSC  00066
>
>
>    2 DTC recognized
>
>00589    032
>Airbag Igniter 1-Passenger Side-N131
>Resistance value too large
>sporadic DTC
>
>00588
>Airbag Igniter-Driver Side-N95
>Resistance value too large
>sporadic DTC
>
>(end)
>
Michael, First off at one time you did hit an over rev condition. The slip
indicated sporadic. That is what it was sporadic. If during the next drive
cycle you had an over rev condition it would be stored as an hard code. The LDP
is stored as a hard code. This is what tripped the light to come on.. The LDP
circuit will have to checked for loose connections or a defective part.

We apply stabilant to air bag connectors whenever we receive this sporadic
code. If the same DTC comes on again the air bag component should be replaced.

Don