[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: WHIPPLE [Was: Re: H&R Coilovers, Autotech Stress Bar, Whipple]
Khan,
I don't mean to speak for Jeff but I have the Whipple mount as well. Install
was piece of cake--easier than rotating your tires or changing the oil. You
don't even need to jack the car up.
Go here for more impressions:
http://www.panix.com/~aqn/GTI_VR6/gti_vr6/library/engine/Whipple_front_motor
_mount.html
And here for a how-to:
http://www.panix.com/~aqn/GTI_VR6/gti_vr6/library/engine/inst_Whipple_front_
motor_mount.html
As usual, the username is "driver" and the password is "hired"
The Potterman has a bunch for about $60. I think Velocity carries them too.
Hope that helps.
Kevin
> -----Original Message-----
> From: Khan Klatt [SMTP:kmk@pacificrim.net]
> Sent: Monday, January 25, 1999 3:23 PM
> To: jettaglx@igtc.com
> Subject: WHIPPLE [Was: Re: H&R Coilovers, Autotech Stress Bar,
> Whipple]
>
> At 11:21 AM -0800 1/25/99, Jeff Newton wrote:
>
> >While the car was up on the hoist, Fedex arrived with my Whipple
> >Mount, so in it went. Super easy install.
>
> >1) The whipple is a MUST HAVE. Shifter feel is MUCH MUCH better than
> >stock!
>
> Jeff-
>
> The more I read about these, the more intrigueing they are. Where do you
> get them, what are the prices, and can I do my own install with basic
> tools, or will I need some serious tools, need to take engine out, etc?
>
> -Khan
> --------------------------------------------------------------------------
> --
>
> Khan Klatt <kklatt@nw.verio.net>
> Verio
> Network Engineer Bellingham Branch
> Office
> Tel 800.591.2757 x 13 725 N. State
> Street
> Fax 360.738.8315 Bellingham, WA
> 98225
>
> --------------------------------------------------------------------------
> --