[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: VW connector Part #'s...



Yes, it should be the exact same connector.

Kevin

> -----Original Message-----
> From:	Chuck Simpson [SMTP:csimpson@zeltech.com]
> Sent:	Wednesday, February 03, 1999 11:39 AM
> To:	jettaglx@igtc.com
> Subject:	Re: VW connector Part #'s...
> 
> But what about the wire harness in the rear?
> Would it be the same size as well?
> 
> Thanks,
> 
> -Chuck...
> 
> "Ng, Kevin (NationsCredit)" wrote:
> 
> > Take a look at the back of your euro switch (or stock switch, whichever
> you
> > have in your hand). You should see a  whole bunch of little connector
> slots.
> > When you go to the parts counter, ask to see the part and make sure they
> > look the same. It shouldn't be too difficult. There are only two sizes I
> > believe, just be sure you get the one for the correct width.
> >
> > I used the reverse light bulb and it works perfectly.
> >
> > Kevin
> >
> > > -----Original Message-----
> > > From: Chuck Simpson [SMTP:csimpson@zeltech.com]
> > > Sent: Wednesday, February 03, 1999 11:20 AM
> > > To:   jettaglx@igtc.com
> > > Subject:      VW connector Part #'s...
> > >
> > > Rear Fog Question (again)...
> > >
> > > Does anyone have a current Part # for the
> > > connectors that fit into the wiring harnesses?
> > > I called my VW dealer today to find out if they
> > > actually carried N-903-352-03... but they said
> > > that part number is obsolete and the new part
> > > number is:  000-979-133.  Does anyone know
> > > if this is the correct part I need to place wires
> > > into the wiring harnesses?  Maybe Don can
> > > answer this question.  My VW dealer is selling
> > > them for $2.51 a piece.  I just want to make
> > > sure before I go out there and purchase this
> > > part.
> > >
> > > Also... should I just ask for the reverse-light
> > > bulb to use for my rear-fog lights?  Or do I
> > > need a different bulb?
> > >
> > > Thanks,
> > >
> > > -Chuck Simpson...
> > > '98 White Jetta GLX-VR6
> > >
> > > BTW:  I read quite a few old entries from the
> > > ListQuest site and have found several sets
> > > of instructions on installation.  Thanks Kevin
> > > Ng for the link!