[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: VW connector Part #'s...
But what about the wire harness in the rear?
Would it be the same size as well?
Thanks,
-Chuck...
"Ng, Kevin (NationsCredit)" wrote:
> Take a look at the back of your euro switch (or stock switch, whichever you
> have in your hand). You should see a whole bunch of little connector slots.
> When you go to the parts counter, ask to see the part and make sure they
> look the same. It shouldn't be too difficult. There are only two sizes I
> believe, just be sure you get the one for the correct width.
>
> I used the reverse light bulb and it works perfectly.
>
> Kevin
>
> > -----Original Message-----
> > From: Chuck Simpson [SMTP:csimpson@zeltech.com]
> > Sent: Wednesday, February 03, 1999 11:20 AM
> > To: jettaglx@igtc.com
> > Subject: VW connector Part #'s...
> >
> > Rear Fog Question (again)...
> >
> > Does anyone have a current Part # for the
> > connectors that fit into the wiring harnesses?
> > I called my VW dealer today to find out if they
> > actually carried N-903-352-03... but they said
> > that part number is obsolete and the new part
> > number is: 000-979-133. Does anyone know
> > if this is the correct part I need to place wires
> > into the wiring harnesses? Maybe Don can
> > answer this question. My VW dealer is selling
> > them for $2.51 a piece. I just want to make
> > sure before I go out there and purchase this
> > part.
> >
> > Also... should I just ask for the reverse-light
> > bulb to use for my rear-fog lights? Or do I
> > need a different bulb?
> >
> > Thanks,
> >
> > -Chuck Simpson...
> > '98 White Jetta GLX-VR6
> >
> > BTW: I read quite a few old entries from the
> > ListQuest site and have found several sets
> > of instructions on installation. Thanks Kevin
> > Ng for the link!