Re: [Tech VR6] Suspension

[Mark Klaus Radelow <rpc-prod@windrunner.com>]

I knew you'd have to get that in George ;).....

MKR

George Turner, Jr. wrote:

> i second the motion w/ the shine set up...it is by far one of the best, until you decide to go coil overs!!! (hehehehe...mark..8))
> george
> -----Original Message-----
> From: Mark Klaus Radelow <rpc-prod@windrunner.com>
> To: jettaglx@igtc.COM <jettaglx@igtc.COM>; FlyinVR6@li.net <FlyinVR6@li.net>
> Date: Saturday, May 09, 1998 3:05 AM
> Subject: Re: [Tech VR6] Suspension
>
> >The only reason I recommend NOT getting the AutoTech setup is that the springs
> >do not have a warranty.  This kind of makes me hesitant.  If you want the
> >trick setup, try the Shine Setup...If you want an inch lowering just cut the
> >springs one coil in the front and half a coil in the rear.  Being linear you
> >will have no problems with it...
> >
> >MKR
> >
> >FlyinVR6 wrote:
> >
> >> Hey all,
> >>
> >> Has anyone tried or have the suspension set-up that Autotech is selling as
> >> a package? They are advertising the Bilstein HD with HOR Technologie for
> >> $588. If anyone has tried this setup or can reccommend a different setup
> >> for a tighter than stock feel for a daily driver please let me know. Also
> >> not looking to go lower than one inch which is what this setup is
> >> advertised at. Thanx in advance.
> >>
> >> -FlyinVR6
> >> ICQ# 8994103
> >> AOL IM : SwiftVR6
> >> \X/ Real Drivers Wanted \X/
> >
> >
> >
> >