[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: zymol impressions
- Subject: Re: zymol impressions
- From: David Strope <dstrope@erols.com>
- Date: Mon, 30 Mar 1998 10:14:53 -0500
Ok, sounds like you did it right. The greasy film goes away after
your next wash. DOn't worry about it.
Dave
97 GLX
Windsor Blue :)
Ng, Kevin wrote:
>
> I don't know if I did let the stuff dry; the instructions said to apply,
> wait 20-30 seconds, then buff. That's what I did. But even a day later
> with the sun out, there still appears to be a greasy film on the finish.
> Is there something I forgot to do? I tried using terry cloth towels to
> buff, then a cheesecloth, but to no avail.
>
> Kevin
> 97 GLX Windsor Blue
>
> ----------
> From: David Strope[SMTP:dstrope@erols.com]
> Sent: Monday, March 30, 1998 9:27 AM
> To: jettaglx@igtc.com
> Subject: Re: zymol impressions
>
> You're not suppose to let the wax dry. That's why it was so hard to
> work with. Look at the directions.
>
> Dave
> 97 GLX
>
> > 3:30pm- Applied Zymol Carbon wax. The "owner's manual" instructs me to
> > apply one section at a time, then buff with "light or no pressure".
> > Sounds easy enough. YEAH RIGHT. I guess because of the high carnauba
> > content, it doesn't powder up like conventional waxes, which is a good
> > thing, but it takes FOREVER to remove and get that clean, deep shine.
> > After about 2 1/2 hours of buffing, aching, and pondering the meaning
> of
> > life, mission complete. Results are spectacular. After another hour to
> > let the wax "cure", a final wipe. I hope it was worth it...
> >