Re: Removing Side Blinkers Without Breakage

["Jeffrey S. Earl" <phish@student.umass.edu>]

Dave A. wrote:
> 
> > I've been told you can remove these guys from the front with a flat
> > blade but there is a chance of breakage.
> >
> > Can someone document how I go about removing the side blinkers from
> > the underside?  I heard it can be done and I'd REALLY rather not take
> > the chance at breaking them by prying them out from the front.
> 
> I don't know about doing it that way, though I saw my friend do it on
> my car-  he used a SMALL screwdriver tip at the back of the blinker to
> gently pry it out-  there's a retaining spring-clip thing there-  I
> think as long as it's pushed out of the way nicely, you won't have any
> problems.
> 
> Good luck!
> 
> -Dave

  I agree with dave in that you must pry from the back with a small
screwwdriver.  I wouldn't worry too much about breaking them however. 
If you do the only thing that breaks is the retaining clip on the back. 
To put the light back in just use a little silicone around the edge and
it stays in fine.  I did this and it looks normal and is very secure.  

    good luck,

    jeff
    95 glx