Re: Der Cup Spoiler

[Jay.Saathoff@pscmail.ps.net]

- ------ =_0_MIME_Boundary_26919.334ddc33.dcuh029.dcu.ps.net
Content-Type: text/plain; name="Authorized by..."; charset=us-ascii
Content-Disposition: attachment; filename="Authorized by..."

Message authorized by:
    : cnscenic@mm.com%smtp at x400po

- ------ =_0_MIME_Boundary_26919.334ddc33.dcuh029.dcu.ps.net

     I remember the article said that if we had a U.S. spec chin spoiler, 
     we'd have to drill our own holes.  Is my GTI-VR6's bone-stock chin 
     spoiler the one they were talking about?  I'm assuming that drilling 
     my own holes would be pathetically easy, but have you considered 
     fabricating cup spoilers for both versions?  Either way, going out of 
     your way for fellow GTI-ers like this makes _YOU_ "da bomb"!
     
     Your next mission, should you choose to accept it:
     fabricate a cowl-inducted ram-air system for us.  Hood scoops would 
     look awesome, don't you think?  "Awwwww-yeah... Two-hundred and forty 
     dollars... worth of puddin'"
     
     - Jay Saathoff  


______________________________ Reply Separator _________________________________
Subject: Der Cup Spoiler
Author:  owner-gti-vr6@dev.tivoli.com%smtp at x400po
Date:    4/10/97 8:46 PM


hi all, chris collier here,
     
i thought i would post this to the list in case it was not recieved by 
everyone;
     
in the april issue of European Car, there was an article on page 112 
describing the Cupspoiler; after reading this article i wanted one, 
except for a few things; the cost for one, and the fact that, in the 
cost you didn't even get the support rods; well it was clear that i had 
a mission;
     
my mission has been accomplished, and accomplished quite well i might 
add; i have fabricated the exact cup spoiler that neuspeed is selling 
for $170.00 for a fraction of the cost; and unlike neuspeed, i am 
including the support rods and all appropriate hardware at NO extra 
cost;
     
now for the good news, i am selling the complete kit for 
$100.00+delivery; i can ship to anywhere in the world!
     
Der Cup Spoiler is made from the high quality ABS plastic, design to fit 
as if it were a stock item; the hardware is aluminum, and offers 
leveling adjustments;
     
i hope that everyone is as excited about the Cup Spoiler as i am! it 
looks great on our cars, and now it is at a price that we ALL can 
afford;
     
please feel free to e-mail me with any questions, concerns or to place 
an order;
     
i think that i am going to try and put an add in European Car next month 
if i can afford it;
     
i wanted to offer it here on the list first, before going to the public; 
so be a fore-runner, and get one now, please;
     
if things go well, and the demand is there, i might try to fabricate a 
second generation model using, carbon fiber or kevlar; the only problem 
with that is, i want to keep the price affordable;
- --
christopher n. collier
cnscenic@mm.com
     
Special Effects Engineer
     
minneapolis/st. paul
minnesota usa
     
97 VW GLX VR6
White, De-Badged, Clarion 6-Disc Changer, Cannon All Weather Mats, 
Weather Tech Trunk Liner, Neuspeed P-Flow, Neuspeed Front Sway Bar 25mm, 
Neuspeed Rear Sway Bar 28mm, Spax 24-Way Adj. Kit, Autopower 6-Pt. Full 
Bolt-In Roll Cage, Der Cup Spoiler, Tinted Front Blinkers, Tinted Side 
Blinkers, Tinted Side Markers. Momo Super-Anatomical Shift Knob, I've 
Got More Tricks Up My Sleeve...............
     
     
"...........oooooooooohhhhhhhhhhhhh....yyyaaaaaaaaa.....you 
betcha...........shure.........."

- ------ =_0_MIME_Boundary_26919.334ddc33.dcuh029.dcu.ps.net--