[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Bodyside moldings
Really , If you really want to fix this be sure to cover the holes ands
clean the door extremely well . OR buy some euro moldings .
www.evolutionvento.com
Mike Tolliver
-----Original Message-----
From: R Malinka [mailto:rmalinka@spec.net]
Sent: Tuesday, October 17, 2000 4:48 PM
To: jettaglx@igtc.com
Subject: Re: Bodyside moldings
At 08:28 AM 10/17/2000 EDT, you wrote:
>I found that if you REALLY clean the mounting areas and use the right 3m,
it
>will last.,,,
>
>
Nope been there, done that, it doesn't work. All four doors have been
redone myself using 3M double sided tape. I spent many hours carefully
cleaning off the old adhesive and even used prepsol to clean the paint
so that no wax was remaining. Believe me when I say this because I do must
of my own work on the car and I am very meticulous about installation.
This is why I find this so frustrating because I though if I did it myself
it would stay on. Anyway it's time to find some mechanicl fastners.
Bob