Re: Fuel Pump?

[Stewart MacLund <sundie@lunaticfringe.org>]

Uhm.  Isn't the peak HP at 4200?  Or is that the peak torque?  I
forget...

SUndie...
waiting to be corrected... :)

"Billy T." wrote:
> 
> It would take an extreme over rev to do damage to the engine, however, by
> reving to 7300 rpm with stock valve springs, you do  run the risk of binding
> out the inner spring, not to mention there is absolutley no usable power,
> unless you are cammed with at least a 268.
> Kahn,
> You need to get over the fear of the 5500 RPM mark to really take advantage
> of the VR6, I mean heck, peak hp is achieved at 5800.  Try shifting at 6200,
> then you will go really fast.
> 
> BillyT.

-- 


-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Stewart MacLund				Systems Integrator
Email: sundie@zubcor.com		Zubcor Networking
URL:   http://www.zubcor.com/		35 Lewis Street
Fax:   +1.416.465.9148			Toronto, Ontario, CA
Page:  +1.416.372.2862			M4M-2H2
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-