Re: Euro Switch & High Beams

[Scott Catlin <scott.catlin@sierra.com>]

in my case, i had to put the relay back in on top of the jumper to get 
the hi-lo combination to work. i don't have the euro switch, just the 
jumper.

>In a message dated 98-02-11 23:55:00 EST, you write:
>
>> On my car (96 GTI VR6), the stock behavior (in addition to the daytime
>>    running lights) is that when I flash the high beams (pull back all the
>>    way on the stalk), high beams go on AND low beams stay on.  But as soon
>>    as I let the stalk back, then the low beams go out, leaving only
>>    the high beams.  The behavior is the same when going from high beams
>>    to low beams.
>>  
>>    With the Euro switch (I just double checked), when I turn on the
>>    high beams, BOTH low beams and high beams are on.
>>  
>My stock behavior acts the same ('98 GLX) but with the Euro switch installed,
>#110 relay pulled and jumper installed, it still acts stock in terms of the
>low/high behavior.  Did you install the jumper?  Just one?  Does it only 
>go in
>one way?  Is my situation specific to my year?
>
>Thanks,
>Chuck Marshall
>--
>For info on: how to subscribe & unsubscribe, the list's mailing errors,
>    list archive, etc.  see:   http://www.panix.com/~aqn/gti_vr6_list/