Re: cd changer

["Rosario, Peter" <RosariP@divinvest.com>]

That sucks. Give me a few hours Adam. I'll go down to my car at lunch
and see what route they took for the wiring. I'll let you know then how
it was done.

Peter
 ----------
From: Adam Lindsay
To: jettaglx@igtc.com
Subject: Re: cd changer
Date: Friday, August 28, 1998 8:29AM

Nope, not wired at all.

 --------------------------------------
Adam Lindsay
Mindex Technologies Inc.
adam@mindex.com

 -----Original Message-----
From: Rosario, Peter <RosariP@divinvest.com>
To: Jetta Comments <jettaglx@igtc.com>
Date: Friday, August 28, 1998 9:06 AM
Subject: Re: cd changer


>The trunk was already wired with the 2 RCA's and the DIN plug.  For
>power I spliced into the power line for the Bose amp, that way I
>wouldn't have to run a separate line to the front of the car. I did put
>an in-line fuse on the power line, just in case.
>
>Are you pre-wired ?? If so, follow the RCA's back to the front and run
>your new one's parallel. Wire rap them together.
>
>Pete
>98 Blk/Blk X
> ----------
>From: Adam Lindsay
>To: jettaglx@igtc.com
>Subject: Re: cd changer
>Date: Friday, August 28, 1998 7:25AM
>
>How did you run the wires? I am thinking of running RCA wires for SUBS
>and
>of course a powerlead. I want to run them down the side of the car,
>under
>the footstep.
>
> --------------------------------------
>Adam Lindsay
>Mindex Technologies Inc.
>adam@mindex.com
>
> -----Original Message-----
>From: Rosario, Peter <RosariP@divinvest.com>
>To: Jetta Comments <jettaglx@igtc.com>
>Date: Friday, August 28, 1998 8:01 AM
>Subject: cd changer
>
>
>>The adaptor is both, female on one end and male on the other. It
>>connects to the plug in your trunk and then into your cd player. I
>>installed it last weekend.
>>
>>Peter
>>98 Blk/Blk X
>> ----------
>>From: gwalker@cinenet.net
>>To: jettaglx@igtc.com
>>Subject: Re: cd changer
>>Date: Thursday, August 27, 1998 8:15PM
>>Priority: High
>>
>>I'm getting conflicting info regarding the CD changer adapter for the
>>Panasonic 6 disc unit. The local installation place says the 8 pin
>>adapter
>>needs to be female to integrate with the factory wiring, while
>>Crutchfield
>>says their adaptor is male. Has anybody purchased the adaptor, and is
>it
>>a
>>female connection? Thanks in advance...
>>
>>Greg Walker
>>97 GLX