RE: Euro chin spoiler

[Scott Catlin <scott.catlin@sierra.com>]

that's not the euro spoiler. if it's the spoiler in the VW Accesories 
catalog, it's not the right one. 
>
>Wait, which part are we talking about? I asked at the dealer last night
>and the part # he gave me for the A3 Chin Spoiler was ZVW114002. Cost:
>$270.90. That's U.S. dollars, but still..... And he said it's a
>one-piece unit. I checked the picture in his book and it is definitely
>not the stock spoiler on my VR6. The picture had a spoiler with three
>intake areas.  I missed a lot of this thread, but there was one note
>that said this was a two part piece and cost about $50 bucks a piece or
>so...? What's what fellas?
>
>Thanks-
>Richard
>'97 GTI VR6
>
>>-----Original Message-----
>>From:	Perfvw [SMTP:Perfvw@aol.com]
>>Sent:	Thursday, December 18, 1997 11:47 AM
>>To:	ANDREW_ATWELL@HP-PaloAlto-om20.om.hp.com; gti-vr6@dev.tivoli.com;
>>jettaglx@igtc.com
>>Subject:	Re: Euro chin spoiler
>>
>>   You have to trim about 3/4" off the front lip if you want it to look
>>properly.  You also have to trim some of the tabs off of the spoiler.  I
>>bought mine from the dealer at a cost of $180 Canadian.  I also put 4 screws
>>throught the bottom to hold it in place. 
>>
>>    SERGIO
>>    '95 GTI VR6 MAUVE 
>>--
>>For info on: how to subscribe & unsubscribe, the list's mailing errors,
>>    list archive, etc.  see:   http://www.panix.com/~aqn/gti_vr6_list/
>--
>For info on: how to subscribe & unsubscribe, the list's mailing errors,
>    list archive, etc.  see:   http://www.panix.com/~aqn/gti_vr6_list/