[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: How does regrinding work?
- Subject: Re: How does regrinding work?
- From: "christopher n. collier" <collier@iglou.com>
- Date: Wed, 10 Dec 1997 07:50:51 -0500
Mark Klaus Radelow wrote:
> The Techtonics 260 Cams for the VR6 are supposedly regrinds. Could
> someone please tell me how you would regrind a cam for increase lift
> and
> duration? It seems to me (as my friend pointed out) that if you take
> material away from the cam lobes themselves either a.) the valve would
>
> no longer seal properly; and/or b.) it would DECREASE lift since the
> cam pushes the valve into the cylinder. Thanks in advance for you
> posts...
plain and simply: first you add material by welding to the cam, then you
take off the desired amount by grinding
>
>
> Mark Radelow
- --
christopher n. collier
collier@iglou.com
SCCA Member
R254561
Region 017
97 VW Jetta GLX VR6
Digest Version of Mods Available Upon Request.......
In search/need of a 2.0L 16v engine for project car