Re: I finally got my chip

[JPearce <j.pearce@daxcontrol.com>]

Depending upon the chips package type, DIP vs. PLCC, you should be able to just
bend the legs back into position, just be careful. Use a good pair of needle
nose plyers or forcepts.

Brian Koder wrote:

> Ok so I got it last week.(you'll understand if you get the GTI List)    When
> I looked at the chip I noticed that two
> contacts (on opposite sides of the chip) seem to be bent.   I am comparing
> it to the stock chip since I am upgradeing from the P-chip.   I already
> checked with the supplier and was told to straiten them and they would be
> ok.   Anyone have any thoughts or recomendations.
>
> TIA
> Brian
> Waiting to install G-chip