RE: Side Marker/Turn Signal Mod

["Franklin Mosley" <fmosley@voyetra.com>]

After work yesterday I went to radioshack to pick up the Moisture-resistant
tap-in connectors.  I will try to do the mod on Saturday, if the rain stops
here in NY.  Anyway, I have a question, has anyone done this mod on a 98
model?  Are the wiring colors the same?  Is there anything that I should
look out for besides the ones that are listed on the page?

Thanks


-----Original Message-----
From:	owner-jettaglx@igtc.com [mailto:owner-jettaglx@igtc.com] On Behalf Of
VWGTi@aol.com
Sent:	Wednesday, January 27, 1999 5:07 PM
To:	jettaglx@igtc.com
Subject:	Re: Side Marker/Turn Signal Mod

In a message dated 1/27/99 5:02:49 PM Eastern Standard Time, MRobT@aol.com
writes:

> I went to the web site and read the instructions, the only thing I'm
worried
>  about it are the tabs on the grill mentioned by the web site author.  Did
> you
>  break any of yours off while removing the grill?  Is it fairly easy to
avoid
>  breaking them if I'm careful?
>  TIA,
>  ROB
>  '97 GLX
>

As long as you take your time...They wont break.  Use a small screw driver
to
help pry out the ends.  I had 2 of mine broken prior to this mod...and i
didn't break anymore.


Jeff